https://www.banjohangout.org Banjo Hangout - Other Instruments Classifieds Feed en-us Wed, 24 Jun 2026 08:06:00 CST Wed, 24 Jun 2026 08:06:00 CST eric@banjohangout.org eric@banjohangout.org https://www.banjohangout.org/classified/115716 Vintage Kalamazoo by Gibson Oriole Mandolin. Early 1940s from what I’ve read. ~ Open to reasonable offers ~ This mandolin has been restored and plays well and sounds quite nice with lots of sustain. The work I’ve done to it includes replacing the broken braces with new pine braces that I made and installed, as seen in the last photo before gluing the back on. I’ve also glued and cleated a few cracks in the top and back among the numerous others that had been previously repaired by someone else. One brace had been cracked near the cross point and glued back, but allowed the top to sink in under the bridge. At one time someone had added posts between the top and back to support the top, which cracked the thin back as can be seen in two distinct spots in the middle. I also re-fitted the bridge to the top once the brace repair was made. I believe the tuners, tailpiece, and cover are original to it. It had a pickguard at one time but was not with it when I obtained it. The action is currently a 1/16” at the 12th fret. Some wear to the first few frets. The nut is an older replacement, with the spacing a bit wider than the wear in the frets indicate. I worked a few of the slots down a bit to get it playing easier. Not sure if the bridge is original to it. Currently has a set of light D’Addario strings (.010-.038”) on it. Comes with a chipboard case that came with it. Video of me playing it here: <a href="https://youtu.be/IwOVO9-_vow?is=dREOeELFMwUY41rx" target="_blank">youtu.be/IwOVO9-_vow?is=dREOeELFMwUY41rx</a> Any questions, feel free to ask. Thanks for looking! Wed, 24 Jun 2026 08:06 CST eric@banjohangout.org https://www.banjohangout.org/classified/115715 Martin Custom Shop 18 Style Dreadnought w/ Sinker Mahogany, Adirondack spruce top (non-VTS) Forward shifted scalloped bracing, Sinker Mahogany neck, neck block, back, sides and end block (old growth mahogany cut between 1880 and early 1920's in Belize, a quality no longer available on trees cut today), 1-3/4" nut width, Performing Artist neck contour, adjustable truss rod, bone nut and saddle, Geib style HC Hardly played. Still has original strings. Never left home. Boveda humidified. Wed, 24 Jun 2026 07:05 CST eric@banjohangout.org https://www.banjohangout.org/classified/113738 Fender Player II Stratocaster HSS Modified About This Original Fender Stratocaster The Player II Modified Stratocaster® HSS is a classic guitar with the modern playerin mind. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to thecomfy 9.5”-radius slab rosewood or 1-piece maple fingerboard with smooth rolled edges and 22 medium jumbo frets. The alder body provides classic Fender punch and is available in a variety of exciting new finishes. The Player II Modified humbucker is articulate with plenty of output while the noiseless™ pickups deliver classic Strat® chime and sparkle while eliminating unwanted noise. For additional tonal flexibility the push/pull switch on the 2tone control splits the bridge humbucker for classic Strat® single-coil tones. The 2-point tremolo,& short post locking tuners, TUSQ® nut and modern string tree all combine to keep tuning incredibly stable as the wider travel of the chamfered tremolo block allows players to coax even more expressive, musical vibrato from their instrument. Features Modern "C" Neck Profile with 9.5" Radius Fingerboard and Rolled Edges Player II Modified Humbucker and Noiseless Stratocaster Pickups 2-Point Synchronized Tremolo with Block Steel Saddles and Chamfered Tremolo Block Short Post Locking Tuning Machine Heads TUSQ® Nut and Modern String Tree Master Volume with Treble-Bleed, Tone 1. (Neck/Middle Pickups), Tone 2 (Bridge Pickup) Pickup Configuration HSS 5 Position Blade: Position 1, Bridge Pickup- Position 2, Bridge and Middle Pickup, Position 3, Middle Pickup, Position 4, Middle and Bridge Pickup, Position 5, Neck Pickup 2-Point Synchronized Tremelo with Block Saddles and Chamfered Tremelo Block Aged White Plastic Knobs and Pickup Covers Hardware: Nickle/Chrome 4 Bolt Neckplate with "F" Logo 4 Ply Tortoise Pickguard Modern Dual Wing String Tree GHS Boomer Steel Nickle Plated .010-.042 Tuning Machines Deluxe Plated Sealed Locking Rosewood Fingerboard 9.5" Radius Fingerboard Urethane Satin Neck Finish "C" Shape Maple Neck with 22 Frets TUSQ Nut 1.650" Wide White Inlays & Side Dots Peghead Truss Rod Adjustment Gator Hardshell Case Included NOTE*** This Instrument is an Original Fender Guitar & has been Professionally Set-Up including Fret Leveling, Crowning & Polishing. Shipping Costs & Insurance Quoted are to the USA Only. Outside the USA, Contact Us for Shipping/Insurance Costs Wed, 24 Jun 2026 02:03 CST eric@banjohangout.org https://www.banjohangout.org/classified/113737 Fender Style Partscaster “1965” Coral Red New 2026 AMB Co Custom Shop Fender Style Parts Caster Guitar. This Custom Shop Guitar features the finest parts and components used with many of Fenders Assembly Line Instruments. The Impeccable Time Consuming Craftmanship defines the true Low Cost of AMB Co Custom Shop Instruments made. This Custom Partscaster Guitar Features: Authentic Fender Player II Alder Wood Body with a High Gloss Coral Red Gloss Polyester Finish Authentic Fender Pure Vintage '65 Single-Coil SSS Pickups & Wiring Harness Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge/Middle Pickup) 5-Position Blade Switch: Position 1. Bridge Pickup, Position2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup Pure Vintage Synchronized Tremolo with Bent Steel Saddles 4-Bolt Vintage-Style Fender “Custom Shop” Neck Plate 3-Ply Eggshell Vintage Style Pickguard w/Vintage White Plastic Control Knobs and Switch Tip MIJ Maple Neck with 9.5” Radius Medium C Shape w/Rosewood Fingerboard & 21 Jumbo Frets & 1.625” wide Nut Strings: GHS 10-42 Boomers Neck Finish: Nitro Satin Finish w/Vintage Tint Double Expanding, Double Action Heel Truss Rod Adjustment Authentic Fender Strap Locks Mounted and Included Gator Black Lined Hardshell Case Included Note*** This Instrument is not an Original Fender Guitar & has been Professionally Set-Up including Fret Leveling, Crowning & Polishing. Shipping Costs & Insurance Quoted are to the USA Only. Outside the USA, Contact Us for Shipping/Insurance Costs Wed, 24 Jun 2026 02:02 CST eric@banjohangout.org https://www.banjohangout.org/classified/113490 We have for Sale a Used Limited Edition Kel Kroydon Custom Shop Stratocaster Style Guitar. This Custom Shop Guitar features the finest woods and components used for a Professional Instrument. The Impeccable Time Consuming Craftmanship defines the true Custom Shop Instruments made. This Limited Edition Guitar Features: Authentic Fender Alder Wood Body with a High Gloss Urethane Finish Kel Kroydon Custom Shop Hand Wound "69" Single Coil Alnico 5 Pickups CTS Pots 5-Position Blade: Position 1. Bridge Pickup Position 2. Bridge and Middle Pickup Position 3. Middle Pickup Position 4. Middle and Neck Pickup Position 5. Neck Pickup. Controls: Master Volume, Tone 1. Neck/Middle Pickups. Tone 2 Bridge Pickup 3 Ply W/B/W 11 Hole Pickguard Vintage Style Fender 6 Screw Chrome Tailpiece 25.5" Scale Maple Neck with Small Peghead Rosewood Fingerboard 1.66" Nut Width .89" at 1st Fret ,91" at 12th Fret Medium Tall Frets Pearloid Dots Excellent Action and Playability throughout the fretboard Fender Locking Tuning Machines w/18:1 Gear Ratio Very Smooth & Fast Slick Finish on the Neck Black Hardshell Padded Case Included This Custom-Made Limited-Edition Kel Kroydon Stratocaster Style Guitar Retail Cost New was $4,265.00 If you have any questions, please feel free to Contact me. Shipping Costs & Insurance Quoted are to the USA Only. Outside the USA Contact Us for Shipping Costs Wed, 24 Jun 2026 02:01 CST eric@banjohangout.org https://www.banjohangout.org/classified/113489 Kel Kroydon Limited Edition Loaded Stratocaster Body   Features: Premium Alder Body Urethane Black High Gloss Finish SSS Pickup Configuration Fender Specification Neck Pocket 2-3/16” x 3” x 5/8” Fender Vintage Style Tailpiece w/Bent Saddles 2-7/32” Spacing Tremolo Whammy Bar 4 Bolt Custom Kel Kroydon Limited Neck Plate Fender Vintage Style Noiseless Pickups CTS Pots w/ Vintage Style Wiring Treble Bleed PCB 5 Position Blade Control Switch: * Position 1. Bridge Pickup * Position 2. Bridge and Middle Pickup * Position 3. Middle Pickup * Position 4. Middle and Neck Pickup * Position 5. Neck Pickup 11 Hole Modern Tortoise Pickguard Strap Buttons   Quoted Shipping Prices are to the USA Only. Outside the USA Contact us for Shipping Costs Wed, 24 Jun 2026 01:59 CST eric@banjohangout.org https://www.banjohangout.org/classified/113070 RK RD-342 Tonewood Reserve Elite Dreadnought Basically, new guitar comes with new HSC. - Solid AAA Adirondack Spruce tops for warm, booming tone - Solid East Indian Rosewood back and sides for bass and tonal depth - Attention-grabbing Abalone body purfling and rosette - Bound fretboard and headstock to complete the aesthetic The Recording King Tonewood Reserve Elite Series Dreadnought Spruce-Rosewood acoustic guitar delivers the power and projection players want from a top-shelf dreadnought. Full bass and crystalline, piano-like treble characterize the sound of this tonal powerhouse. An Adirondack Spruce top and East Indian Rosewood body help it cut through the mix with unmistakable clarity. SPECIFICATIONS • Model Number: RD-342 • Model Name: RK Tonewood Reserve Elite Dreadnought • Body Shape: Dreadnought • Top Material: Solid AAA Adirondack Spruce • Back Material: Solid East Indian Rosewood • Side Materials: Solid East Indian Rosewood • Top Bracing Pattern: Scalloped X Bracing • Top Braces: Sitka Spruce • Neck Material: Mahogany, 1 Piece • Neck Profile: Thin V • Neck Joint: Dovetail • Fretboard Material: Ebony • Scale Length: 25.4" • # Of Frets Clear: 14 • # Of Frets Total: 20 • Nut Material: Bone • Nut Width: 1-3/4" • Headstock Overlay: Rosewood • Tuning Machines: Nickel Butterbean • Body Binding: Ivory • Rosette: Multi Ring • Top Purfling: Abalone • Fretboard Inlays: Abalone Snowflake • Fretboard Binding: Ivory • Bridge Material: Ebony • Bridge Shape: Belly Bridge • Saddle: Bone • Bridge Pins & Endpin: Ivoroid with Abalone Dot • Pickguard: Tortoise • Finish: Natural Gloss Mon, 22 Jun 2026 13:14 CST eric@banjohangout.org https://www.banjohangout.org/classified/114310 Recording King RD-27 Dreadnought - an awesome playing and sounding all SOLID wood guitar! With HSC! SPECS MODEL: RD-27 BODY SHAPE: Dreadnought TOP MATERIAL: Solid AA Grade Engelmann Spruce BACK MATERIAL: Solid East Indian Rosewood SIDE MATERIAL: Solid East Indian Rosewood TOP BRACING PATTERN: Forward X-Bracing TOP BRACES: Fully Scalloped Spruce NECK MATERIAL: 1-Piece Mahogany NECK PROFILE: Vintage V NECK JOINT: Dovetail FRETBOARD MATERIAL: Rosewood SCALE LENGTH: 25.4" # OF FRETS CLEAR: 14 # OF FRETS TOTAL: 20 NUT MATERIAL: Bone NUT WIDTH: 1-11/16" HEADSTOCK OVERLAY: Rosewood HEADSTOCK INLAY: M.O.P. "Crown" Design TUNING MACHINES: Locking LP Type BODY BINDING: Grained Ivoroid ROSETTE: Classic Style TOP PURFLING: Black/White Fiber FRETBOARD INLAYS: Abalone Snowflake FRETBOARD BINDING: None BRIDGE MATERIAL: Rosewood BRIDGE SHAPE: Standard SADDLE: Bone BRIDGE PINS & ENDPIN: Ivory with Abalone Dot PICKGUARD: Vintage-Style FINISH: Natural Glossy Mon, 22 Jun 2026 13:04 CST eric@banjohangout.org https://www.banjohangout.org/classified/104782 2005 Collings SJ41 mahogany cutaway guitar with original hard case. LR Baggs Anthem pickup. Excellent condition. Beautiful pearl inlay on top and headstock. An outstanding guitar with dynamic volume and tone. Mon, 22 Jun 2026 09:14 CST eric@banjohangout.org https://www.banjohangout.org/classified/114843 This Kentucky mandolin is in mint condition and is from a non-smoking home. Comes with a Kentucky case. Strap is not included. Sat, 20 Jun 2026 19:42 CST eric@banjohangout.org https://www.banjohangout.org/classified/115547 Here is a Kentucky KM-670 F style mandolin for sale. It was bought brand new in November 2024 wnd has never left the house. Has only been played a few hours and has the factory strings still on it. Comes with a new hardshell case and the padded “Kentucky” gig bag. This mandolin has a deep bark and is pleasant and warm to the ear. The mandolin and case are in mint condition with no cosmetic issues other than a few small scratches on the black plastic pick guard which is to be expected from chopping. This mandolin is beautiful and looks like a brand new one in every way. The case is nice and neither the case nor the mandolin has left the house. Smoke free home- any questions please ask. Thank you- Shipping to continental USA only. Ad from Saga website Kentucky KM-670 Standard Oval Hole Mandolin continues in the tradition of the great turn-of the century American luthiers and takes Oval Hole Mandolin design to a whole new level. The traditionally braced top with oval sound hole imparts an airy, woody tone with plenty of volume to meet any live performance. We’ve also combined traditional vintage styling and design with a modern player features that include a 14 fret neck-body joint; positioning the bridge in the “sweet-spot of tone;” allowing greater access to the upper frets. Finished in a beautiful and traditional high gloss sunburst and is crafted from the finest, dry aged European tonewoods for a world-class tone in a classic design. Solid German spruce carved top with traditional Oval soundhole gives you warm, rich tone with exceptional note clarity and volume Solid Alpine maple back and sides for extra punch Slim Alpine one-piece maple neck for comfortable, easy action Choice rosewood fingerboard with polished nickel silver frets ensures silky smooth playability High-gloss sunburst finish for traditional beauty and luster Comes with a sturdy, padded ProTour BV-2520 Mandolin Gig Bag, with Kentucky logo Sat, 20 Jun 2026 19:27 CST eric@banjohangout.org https://www.banjohangout.org/classified/115218 This Kentucky KM 670 is in excellent condition. There are a couple dings on the body, but you have to look really hard to see them. It has a solid hand carved spruce top and hand carved flamed maple back and sides. The finger board is rosewood. It is approximately 5 years old based on the serial number. There has been a Fishman style bridge pickup added and it sounds great. it might be a Fishman but I don't know for sure. Sat, 20 Jun 2026 18:46 CST eric@banjohangout.org https://www.banjohangout.org/classified/107236 This is my seventh archtop guitar and 19th acoustic guitar overall. This is the second walnut archtop guitar I've made with a one-piece back, and I have enough wood in the board to make one more.?This guitar has a 17-3/8” lower bout width and is built mostly following the design in Bob Benedetto’s excellent book on archtop guitar construction. The scale length is 25”, the nut width is 1-3/4”, and the fretboard has a 12? radius. The back, sides, neck, blocks and linings are walnut, the headstock overlay, truss rod cover, fretboard, bridge, tailpiece and endpin are zebrawood, and the soundboard is Sitka spruce from Alaska Tonewoods. This guitar is finished with Tru Oil and has Gotoh tuners and a Corian nut. There is a two way truss rod in the neck. I don’t have a case for this guitar, as my supplier doesn’t have archtop cases. To see a video demonstration of this guitar please follow the link below: <a href="https://youtu.be/b31is00kjBc" target="_blank">youtu.be/b31is00kjBc</a> Fri, 19 Jun 2026 03:57 CST eric@banjohangout.org https://www.banjohangout.org/classified/115347 I’m not a guitar guy nor can I really play one very well. This guitar is in very nice shape for 56 years old. It sounds great and plays well. Has some minor wear here and there but a solid performer. That spot on the back of the headstock isn’t a crack, I’m not sure what it is. Almost like a flaw in the wood and it’s only on the surface. Comes with its Martin HSC in great shape as well. Wed, 17 Jun 2026 15:49 CST eric@banjohangout.org https://www.banjohangout.org/classified/115348 Solid example of a D-18. Great shape. Has no issues I can see. Sounds good and plays good. Comes with HSC. Wed, 17 Jun 2026 15:49 CST eric@banjohangout.org https://www.banjohangout.org/classified/113614 Rare 26-page softbound full color book from Tsumura Illusion Inc. Why not?...If you're gonna assemble a collection why not make it the best of the world. book features beautifully photographed pieces from the collection including; Erard Pianos , Grandfather's Clock by Covet, Chandelier by J. Montoro, Antique Louis Vuitton steamer trunks, Persian & Turkish carpets, gorgeous ornaments by Ronzan, San Marco, Edoardo Tasca, Daum/Elite, Furniture, Tableware, Art/Paintings & Serigraphs by Peter Max, Marco Massimo Sassone, John Lennon, Peter Max's Wear, Mercedes Benz 300SL 1956 "Gullwing" and a nifty little photo of Akira Tsumura holding a custom Gibson semi-solid guitar. Text is mostly in Japanese. Condition is excellent. Wed, 17 Jun 2026 06:38 CST eric@banjohangout.org https://www.banjohangout.org/classified/115628 This rare octave mandolin was hand-built by Walter Johnson of June Mandolins and Guitars in Wytheville, Virginia. Johnson has been crafting mandolins and guitars since 2001 in his small one-man shop, producing only 6–8 instruments per year. Each instrument takes 8–12 months to complete and features hand-applied varnish finish on all builds — a traditional finish that allows the wood to breathe and resonate better than modern polyurethane. This JA5 74 has a 14 1/4-inch scale length and a 1 3/16-inch nut width, making it easier to play for those with smaller hands while still delivering the deep, rich G-D-A-E octave tone with powerful projection.1 piece back and an Adirondack spruce top The fingerboard features a slight radius for comfortable playability. This is a true Made in USA instrument from a dedicated American craftsman who builds in Southwest Virginia. Johnson’s instruments are known for beautiful tone and are recommended by players who value handcrafted quality over mass production. This is an excellent opportunity to own a collector-quality mandolin at a much better price. Perfect for bluegrass, folk, and solo players seeking deep tone with superior playability. with a great bluegrass chop Tue, 16 Jun 2026 14:46 CST eric@banjohangout.org https://www.banjohangout.org/classified/115630 This beautiful Westminster Mandolin Model 125 from the 1990s features a classic sunburst finish that showcases the instrument’s elegant wood grain and vintage appeal. The mandolin is in great to excellent condition with no significant damage or structural issues, making it ready for immediate playing whether you are a beginner looking for a reliable instrument or an experienced player seeking a quality addition to your collection. This A-style mandolin produces a warm,balanced tone with good projection that works well for folk bluegrass country and traditional music styles. The included case provides safe transport and storage protection while transporting. All frets and the fingerboard are in great condition so you can play right away without needing immediate setup work. This is a well-maintained instrument that has been kept in good condition over the years and represents an excellent opportunity to acquire a quality 1990s mandolin with vintage pickup and case included at a fair price. Tue, 16 Jun 2026 11:33 CST eric@banjohangout.org https://www.banjohangout.org/classified/115629 Offered here is an exceptional and rare Craig D. Pederson mandola, built in 1988 during his highly regarded Santa Fe period. This is serial number 66, a very early example of Pederson’s work, and a documented custom commission for Sam Arnold—placing it firmly in the category of serious, handbuilt luthier instruments rather than production pieces. Craig made his own cases completely custom, this one being exceptionally fine. Pederson’s instruments from this era are known for their violin-inspired construction, refined carving, and tonal sophistication. This mandola is no exception—delivering a voice that is rich, balanced, and highly articulate, with excellent projection and sustain. The F-hole configuration provides added focus and clarity, making it equally suitable for ensemble work, Celtic playing, or solo performance. The depth is 2 1/4 inches The width is 11 7/8 inches The nut width is 1 5/16 the scale length is 17 1/4 inches Tone & Playability?This instrument has the kind of mature, open voice that only comes with time—warm low end, clear mids, and a sweet, singing high register. It responds effortlessly to both a light touch and more aggressive playing, with strong note separation and dynamic range. A true player’s instrument. Construction & Features ? Hand-carved spruce top ? Figured maple back and sides ? Violin-style arching and graduation ? F-hole design for projection and focus ? Built in Santa Fe, New Mexico (1988) ? Serial #66 (early production) ? Custom-made for Sam Arnold Condition?Overall excellent condition. The instrument did experience a top seam separation in the past, which has been professionally repaired and is fully stable. This is a common, non-structural issue on carved instruments and does not affect tone or playability. Otherwise, the mandola is very clean with only light signs of careful use. Why This Instrument?Pederson mandolas are rarely seen on the market, and examples from this early Santa Fe period are especially scarce. While not a mass-market name, Pederson’s work is highly regarded among knowledgeable players for its craftsmanship and tonal depth. This is an opportunity to own a boutique, concert-level mandola at a price point well below comparable modern custom builds. Summary ? Rare early Pederson mandola (Santa Fe era) ? Low serial number (#66) ? Documented custom build ? F-hole configuration (desirable and versatile) ? Excellent tone and playability ? Professionally repaired seam, fully stable A compelling instrument for the serious player or collector looking for something distinctive, responsive, and musically inspiring. Feel free to reach out with any questions or for additional photos/audio clips. Tue, 16 Jun 2026 11:29 CST eric@banjohangout.org https://www.banjohangout.org/classified/115476 1986 Fender Telecaster, made in Japan,(aka the '62 Custom model), sunburst, double bound cosmetics, equipped with a Forrest Lee Jr. B-bender. I was going for a Clarence White sound, so I installed a Lollar J-Street bridge pickup and Lollar Royal T neck pickup. Hot pickups, and they sound great in this guitar. Serious Clarence vibes; the bender can even be adjusted to have the “long pull” like Clarence’s original Tele. The Tele is in good shape for a forty year old guitar, just normal cosmetic wear, everything totally functional and ready to gig out of the box. Though the '80s Japanese Fenders are sought after now, a former owner sanded the "Made In Japan" label off the back of the neck (I've seen more than one like that; I guess people used to have an inferiority complex about MIJ Fenders). Compensated saddles, upgraded electronics (original saddles, pickups and switch included). Hardshell Fender-style case included, as well as a padded gig bag. The guitar sounds amazing, with the Lollar J-street bridge pickup sounding hot and twangy and the Royal T neck pickup sounding full bodied and Strat-y; if you're a fan of Clarence and/or Marty Stuart, I don't think you'll be disappointed. The bender works great, smooth and even (more to my liking than the P/G benders I've tried). It's such a blast to play, and I know I'm going to regret parting with it but there is other gear on the horizon; something has to move out before the new one moves in. This is a country rock machine that feels great and sounds great; no issues, new Super Slinkys 9s, ready to gig out of the box. $1998 OBO + 90.00 UPS Ground. Sorry, no trades (raising funds for another purchase). Lots more photos at the More Info link below. Please check out the video clip: <a href="https://www.youtube.com/watch?v=_TKRb3VXGsQ" target="_blank">youtube.com/watch?v=_TKRb3VXGsQ</a> and feel free to write with any questions. Thanks for your interest! Mon, 15 Jun 2026 14:32 CST eric@banjohangout.org https://www.banjohangout.org/classified/115536 Features: Made in 1971 Solid spruce top Mahogany neck Rosewood fingerboard and bridge Original dreadnought body style Made in Nazareth, Pennsylvania, USA Spectacular dry woody tone that only 55 years of playing and aging can do. As is well known, some vintage D18s are great and some are just average. This is a truly great one. Tone to the bone. Appropriate for any style of playing , it’s a bluegrass player dream guitar with a stunning, booming low E. Frets are in great shape. Excellent neck angle and low actionCondition: Please see photos for exact cosmetic condition. The guitar is being sold as shown. Whether you’re a player looking for a lifelong instrument or a collector seeking a vintage Martin, this D-18 is a fantastic example of one of the most iconic acoustic guitars ever built. Feel free to contact Fri, 12 Jun 2026 14:52 CST eric@banjohangout.org https://www.banjohangout.org/classified/115531 This 2021 Pono L-30(s) parlour guitar is in excellent condition and plays beautifully. Built with a solid Engelmann spruce top and solid rosewood back and sides, it delivers rich, balanced tone with strong projection for its small body. Recently set up with comfortable low action, it’s ready for studio, stage, or serious home playing. Perfect for players who want vintage-style tone and modern playability in a compact, travel-friendly size. Wed, 10 Jun 2026 10:23 CST eric@banjohangout.org https://www.banjohangout.org/classified/111419 this is a super clean Fender F-1000 guitar made by harmony between 1969 and 1971....you couldn't ask for a much cleaner vintage guitar than this one..that is reflections you see on the back of the neck....someone has put some nylon strings on this so it will need a new set of light guages..comes in a much newer gig bag....will sell for $225.00 and ship $50.00 conus...thanks!! Wed, 10 Jun 2026 05:32 CST eric@banjohangout.org https://www.banjohangout.org/classified/112454 Offering my 1910 DITSON EMPIRE GUITARS catalog reprint shown. Not sure who did the reprint of this 1910 dated catalog but it contains loads of useful information on the classic DITSON EMPIRE FLATTOP GUITARS..as well as "guitar fittings" (cases, capos, bridges, tuners,etc) Wed, 10 Jun 2026 02:58 CST eric@banjohangout.org https://www.banjohangout.org/classified/112455 Offering my VIRZI VIOLIN (Gibson Inc) catalog reprint shown. Not sure who did the reprint of this vintage udated catalog but it contains loads of useful information on the VIRZI violins and numerous endorsers. Wed, 10 Jun 2026 02:57 CST