Got'em dialed in pretty good at 50 yards.. :0)

These are the cut 22 lr case bullets i made up the other day...

Oh..used a differnt rifle for this time out to the range..
This is the 1885 falling block rifle n not the 219 savage..

That tree rat wouldn’t have stood a chance??

Now if I can only get'em to stand ..still fer as long as that paper target dose.... ;0)

Made a new die ..a little straiter n neater...bit more polished on the inside..
Been playing with the adjustments..

As for weight of the boolits..I have got it down to ..3/10ths..of a grain..variance...

That is really good.. :0)

219 savage..
Dose not do as good as the 1885 falling block..
But not too bad..

Differnt savage 219 in 22 hornet..
Iron sights.. not to bad fer no scope..

I got a j4 weaver scope n mount for it..
But gotta find screws to fit the holes on the barrel..
Thay are 10-32s..

Oh had to Kentucky windage a bit with the iron sights..

They print high at thier lowest setting by about 5"...n a bit to the right... :0/

quote:

---

Originally posted by STUD figmo Al

Differnt savage 219 in 22 hornet..
Iron sights.. not to bad fer no scope..

I got a j4 weaver scope n mount for it..
But gotta find screws to fit the holes on the barrel..
Thay are 10-32s..

---

You are referring to screws needed for the base ?

 I think I have some various old base screws . I don't know how to determine if a screw is 10-32. But if I have a set, you are welcome to them. 
I have a small collection of old Weaver scopes. I like the ones that have post reticles. Some are k series, 2.5, 3, and 4. Also have some of the early variable scopes. They still work as good as they always did. If you think you could use one, just let me know.

I will see what old screws I have and we'll figure out what they are.

Thanks Less ..
These screws n threads are very common..
I think they are not..typical but someone in the past did this work on the barrel..
For the weaver mount they should have been 8-40's..
But who knows what mount was used..

I can make it work tho.. :0)

Love post redicals..!

You can see the holes in the barrel in the side Pic of the 219
.

I had an uncle, now deceased, who once told me he loved the Weaver scopes with the big post reticle.
He said, “You can sure see a deer at night, with that big post” !

Scope is mounted.. :0)

The shootin...

Oops this pic...

De rimmed 22 mag cases..down to 6.5 mm...
Hopefully from here I can do ..
6.5 mm boolits...257 boolits..n..6 mm(.243)..Caliber boolits..

The brass is thicker..n..dooin things in stages just goes better ..

I am hoppin that these work out well..

As so I can feed me 6x45 mm a real nice round n rifle..

N..for .257..the 25-20 wcf..n 250-3000 Savage cartridge..

N..I do have an old 6.5 Japanese rifle..that i should finish..
Started that one as a teen...
Been kinda draggin me feet on that one a bit... :0/

Oh..n me 25-35 win..
N....256 win mag...
N.....
;0)

Today made a few 22 boolits..
Started on 6 mm n 25 cal boolits...
Limited success...

Gotta rethink ..a bit..

Oops..these pics... :0)

Rejects go bake to the melting pot...

We should all be thrown in the melting pot!!!
Slammer!!!

quote:

---

Originally posted by STUD figmo Al

Rejects go bake to the melting pot...

---

Do you mean they "bake" in the melting pot or go "back" (as in return) to the melting pot.

Joe

“pot” as in vessel or “pot” as in reefer, to get baked…

quote:

---

Originally posted by cottontop

quote:

---

Originally posted by STUD figmo Al

Rejects go bake to the melting pot...

---

Do you mean they "bake" in the melting pot or go "back" (as in return) to the melting pot.

Joe

---

Yep back Joe..

Thanks

More aggressive hollow point design....
50 gr boolit..

Might halfta find ah full soda pop can to shoot at.... :0)